{"title":"Arisaka","description":"","products":[{"product_id":"arisaka-defense-dual-side-scout-mount-m-lok","title":"Arisaka Defense Dual Side Scout Mount M-Lok","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Arisaka Dual Side Scout Mount (DSSM) has the ability to mount two Scout lights side by side and only occupies a single M-Lok slot. This mount allows the user to run a powerful white light like the 18350\/18650 Modlite PLHv2\/OKW, plus a supplemental infrared illuminator like the B.E. Meyers Kiji or Modlite IR heads.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser\/illuminator series, including the ATPIAL-C, AN\/PEQ15, and LA-5\/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs a bonus, the Dual Side Scout Mount also works nicely on the Sig MPX PCC and MCX Virtus M-Lok handguards.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSKU: DSSM-M\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLength: 1.3\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWidth: 1.86\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThickness: 0.2\"\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWeight: 0.9 oz\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe mount is CNC machined from 6061\u003cspan data-mce-fragment=\"1\"\u003e-T6\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ealuminum and \u003cspan data-mce-fragment=\"1\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e hard coat anodized. Includes necessary screws to attach two light bodies to mount. Requires an IP20\/T20 Torx driver for installation (not included). Recommended torque: \u003cstrong data-mce-fragment=\"1\"\u003e30 inch lbs\u003c\/strong\u003e for M-Lok screws and \u003cstrong data-mce-fragment=\"1\"\u003e20 inch lbs\u003c\/strong\u003e for light body screws with medium strength threadlocker. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"WH3","offers":[{"title":"Default Title","offer_id":48199611941078,"sku":"DSSM-M","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/Arisaka_4-6-22-14__36929.jpg?v=1778084665"},{"product_id":"arisaka-defense-side-scout-mount-mcx-m-lok","title":"Arisaka Defense Side Scout Mount MCX M-Lok","description":"\u003cp\u003eThe Patent Pending Arisaka Side Scout Mount MCX is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLHv2 and OKW weapon lights, the Arisaka 300 and 600 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of NGAL, ATPIAL-C, AN\/PEQ15, and LA-5\/PEQ laser\/illuminators. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.\u003c\/p\u003e\n\u003cp\u003eDesigned primarily for the SIG MCX and MPX, the Side Scout Mount MCX will also work well on the B\u0026amp;T GHM and APC series, CZ Scorpion and Bren, IWI Tavor, and AR15 M-Lok handguards even without a laser.\u003c\/p\u003e\n\u003cp\u003eCompatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp\u003eM620, M951\/2 and M961\/2 series lights can also be used with the Offset Scout\u003cspan\u003e Mount with the addition of the Arisaka\u003c\/span\u003e \u003ca href=\"http:\/\/arisakadefense.com\/products\/offset-m620-adapter\" target=\"_blank\"\u003eOffset M620 Adapter\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp\u003eWeight: 0.4 oz\u003c\/p\u003e\n\u003cp\u003eThe mount is CNC machined from 6061\u003cspan\u003e-T6\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ealuminum and \u003cspan\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires an IP20\/T20 Torx driver for installation (not included). Recommended torque: \u003cstrong\u003e30 inch lbs\u003c\/strong\u003e for M-Lok screws and \u003cstrong\u003e20 inch lbs\u003c\/strong\u003e for light body screws with Loctite 222 or 243. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e","brand":"WH3","offers":[{"title":"Default Title","offer_id":48199612858582,"sku":"SSM-MCX","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/SSMMCX.jpg?v=1778084671"},{"product_id":"arisaka-defense-offset-scout-mount-mcx-m-lok","title":"Arisaka Defense Offset Scout Mount MCX M-Lok","description":"\u003cp\u003e\u003cspan\u003eThe Patent Pending Arisaka Offset Scout Mount is designed specifically for lights that utilize the Scout-style mounting platform.. It replaces the stock Picatinny rail adapter with a low profile mount for the SIG MCX Virtus M-Lok handguards.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlease note: this mount is designed specifically for the standard MCX VIRTUS handguard which has a tall profile with flat sides. If you have the MCX suppressor compliant handguard you should use the normal \u003ca href=\"https:\/\/www.atomicdefense.com\/products\/arisaka-defense-offset-scout-mount-m-lok?_pos=1\u0026amp;_sid=02bea18b4\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003eOffset Scout Mount M-Lok\u003c\/a\u003e.\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen used on the side mounting surfaces of M-Lok handguards, the Offset \u003cspan\u003eScout\u003c\/span\u003e\u003cspan\u003e Mount places the light at a 45 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Offset \u003cspan\u003eScout\u003c\/span\u003e\u003cspan\u003e Mount\u003c\/span\u003e also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\". \u003c\/p\u003e\n\u003cp\u003eThe Offset\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eScout\u003c\/span\u003e\u003cspan\u003e Mount MCX orients the light at a 45 degree angle and tucks it in closer to the top rail at the 1:30 or 10:30 clock positions. It also\u003c\/span\u003e provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\".\u003c\/p\u003e\n\u003cp\u003eCompatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWeight: 0.6 oz\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe mount is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. Includes necessary screws to attach light body to mount. Requires an IP20\/T20 Torx driver for installation (not included). Recommended torque: \u003cstrong data-mce-fragment=\"1\"\u003e30 inch lbs\u003c\/strong\u003e for M-Lok screws and \u003cstrong data-mce-fragment=\"1\"\u003e20 inch lbs\u003c\/strong\u003e for light body screws with Loctite 222 or 243. Made in the USA. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0659\/4513\/files\/M-LOK_Tips.pdf?14179560724824557381\" target=\"_blank\"\u003eM-Lok Installation Guide\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"WH3","offers":[{"title":"Default Title","offer_id":48199612956886,"sku":"OSM-MCX","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/mcx.jpg?v=1778084672"},{"product_id":"arisaka-defense-inline-scout-mount-picatinny","title":"Arisaka Defense Inline Scout Mount Picatinny","description":"\u003cdiv class=\"description user-content lightboximages\"\u003e\n\u003cp\u003eThe Patent Pending Arisaka Inline Scout Mount (ISM) is designed for use specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the B.E. Meyers MAWL laser\/illuminator series. Three positions on the mount allow for different diameter light heads to clear the MAWL without interference.\u003c\/p\u003e\n\u003cp\u003eCompatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), CD REIN, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp\u003eThickness: 0.2\"\u003c\/p\u003e\n\u003cp\u003eWeight: 0.6 oz\u003c\/p\u003e\n\u003cp\u003eThe mount is CNC machined from 6061\u003cspan\u003e-T6\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ealuminum and \u003cspan\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires an IP27\/T27 and IP20\/T20 Torx driver for installation (not included). A T9 Torx driver is required to remove the stock Picatinny mount from Surefire Scout Lights. Recommended torque: \u003cstrong\u003e20 inch lbs\u003c\/strong\u003e for light body and \u003cstrong\u003e30 inch lbs \u003c\/strong\u003efor clamping screw with low\/medium strength threadlocker (Loctite 222 or 243). Made in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WH3","offers":[{"title":"Default Title","offer_id":48199613120726,"sku":"ISM-P","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ism-p-1__90467.1604601834.png?v=1778084674"},{"product_id":"arisaka-offset-scout-mount-picatinny","title":"Arisaka Defense Offset Scout Mount Picatinny","description":"\u003cp style=\"margin: 0px 0px 1em; padding: 0px; border: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-weight: 400; font-stretch: inherit; font-size: 15px; line-height: inherit; font-family: 'Open Sans'; vertical-align: baseline; color: #595e61; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-style: initial; text-decoration-color: initial;\"\u003eThe Arisaka Offset Scout Mount is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount which tucks the light in much closer to the handguard.\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 1em; padding: 0px; border: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-weight: 400; font-stretch: inherit; font-size: 15px; line-height: inherit; font-family: 'Open Sans'; vertical-align: baseline; color: #595e61; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-style: initial; text-decoration-color: initial;\"\u003eWhen used on the side mounting surfaces of Picatinny handguards, the Offset \u003cspan style=\"margin: 0px; padding: 0px; border: 0px; font: inherit; vertical-align: baseline;\"\u003eScout\u003c\/span\u003e\u003cspan style=\"margin: 0px; padding: 0px; border: 0px; font: inherit; vertical-align: baseline;\"\u003e Mount places the light at a 45 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 1em; padding: 0px; border: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-weight: 400; font-stretch: inherit; font-size: 15px; line-height: inherit; font-family: 'Open Sans'; vertical-align: baseline; color: #595e61; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-style: initial; text-decoration-color: initial;\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 1em; padding: 0px; border: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-weight: 400; font-stretch: inherit; font-size: 15px; line-height: inherit; font-family: 'Open Sans'; vertical-align: baseline; color: #595e61; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\u003cspan style=\"margin: 0px; padding: 0px; border: 0px; font: inherit; vertical-align: baseline;\"\u003eCompatible with the Modlite 18350 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 1em; padding: 0px; border: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-weight: 400; font-stretch: inherit; font-size: 15px; line-height: inherit; font-family: 'Open Sans'; vertical-align: baseline; color: #595e61; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-style: initial; text-decoration-color: initial;\"\u003eLength: 1.30\"\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 1em; padding: 0px; border: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-weight: 400; font-stretch: inherit; font-size: 15px; line-height: inherit; font-family: 'Open Sans'; vertical-align: baseline; color: #595e61; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-style: initial; text-decoration-color: initial;\"\u003eWeight: 0.7 oz\u003c\/p\u003e\n\u003cp style=\"margin: 0px 0px 1em; padding: 0px; border: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-variant-numeric: inherit; font-variant-east-asian: inherit; font-weight: 400; font-stretch: inherit; font-size: 15px; line-height: inherit; font-family: 'Open Sans'; vertical-align: baseline; color: #595e61; letter-spacing: normal; orphans: 2; text-align: left; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-style: initial; text-decoration-color: initial;\"\u003eThe mount is CNC machined from 6061\u003cspan style=\"margin: 0px; padding: 0px; border: 0px; font: inherit; vertical-align: baseline;\"\u003e-T6\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ealuminum and \u003cspan style=\"margin: 0px; padding: 0px; border: 0px; font: inherit; vertical-align: baseline;\"\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan style=\"margin: 0px; padding: 0px; border: 0px; font: inherit; vertical-align: baseline;\"\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires an IP27\/T27 and IP20\/T20 Torx driver for installation (not included). Recommended torque: \u003cstrong style=\"margin: 0px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: bold; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003e30 inch lbs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor clamping screw and\u003cspan\u003e \u003c\/span\u003e\u003cstrong style=\"margin: 0px; padding: 0px; border: 0px; font-style: inherit; font-variant: inherit; font-weight: bold; font-stretch: inherit; font-size: inherit; line-height: inherit; font-family: inherit; vertical-align: baseline;\"\u003e20 inch lbs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor light body screws with Loctite 222 or 243. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e","brand":"WH3","offers":[{"title":"Default Title","offer_id":48199613612246,"sku":"OSM-P","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/osm-p-1.jpg?v=1778084680"},{"product_id":"arisaka-side-scout-mount-picatinny","title":"Arisaka Defense Side Scout Mount Picatinny","description":"\u003cp\u003eThe Arisaka Side Scout Mount (SSM) is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the ATPIAL laser\/illuminator series, including the ATPIAL-C, AN\/PEQ15, and LA-5\/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.\u003c\/p\u003e\n\u003cp\u003eThe SSM is compatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp\u003eThickness: 0.2\"\u003c\/p\u003e\n\u003cp\u003eWeight: 0.6 oz\u003c\/p\u003e\n\u003cp\u003eThe mount is CNC machined from 6061\u003cspan\u003e-T6\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ealuminum and \u003cspan\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a 1\/8\" Allen wrench and IP20\/T20 Torx driver for installation (not included). A T9 Torx driver is required to remove the stock Picatinny mount from Surefire Scout Lights. Recommended torque: \u003cstrong\u003e15-20 inch lbs\u003c\/strong\u003e for light body and clamping screws with medium strength threadlocker (Loctite 242\/243 or Vibratite VC3). Made in the USA.\u003c\/span\u003e\u003c\/p\u003e","brand":"WH3","offers":[{"title":"Default Title","offer_id":48199614038230,"sku":"SSM-P","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/Arisaka-1-4.jpg?v=1778084691"},{"product_id":"side-scout-mount-keymod","title":"Arisaka Defense Side Scout Mount KeyMod","description":"\u003cp\u003e\u003cstrong\u003ePlease note: the current product pictures show the M-Lok version, but the KeyMod is identical besides using BCM KeyMod screws.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Arisaka Side Scout Mount (SSM) is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low-profile mount for KeyMod handguards, and tucks the light underneath either side of the ATPIAL laser\/illuminator series, including the ATPIAL-C, AN\/PEQ15, and LA-5\/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.\u003c\/p\u003e\n\u003cp\u003eThe SSM is compatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp\u003eThickness: 0.2\"\u003c\/p\u003e\n\u003cp\u003eWeight: 0.6 oz\u003c\/p\u003e\n\u003cp\u003eThe mount is CNC machined from 6061\u003cspan\u003e-T6\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003ealuminum and \u003cspan\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a T15 and IP20\/T20 Torx driver for installation (not included). A T9 Torx driver is required to remove the stock Picatinny mount from Surefire Scout Lights. Recommended torque: \u003cstrong\u003e20 inch lbs\u003c\/strong\u003e for KeyMod and light body screws with medium strength threadlocker.\u003c\/span\u003e\u003c\/p\u003e","brand":"WH3","offers":[{"title":"Default Title","offer_id":48199614103766,"sku":"SSM-K","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ArisakaSSM_985bd418-636c-40ca-aaac-d794070042d4.jpg?v=1778084692"},{"product_id":"side-scout-mount-m-lok","title":"Arisaka Defense Side Scout Mount M-LOK","description":"\u003cp\u003eThe Arisaka Side Scout Mount (SSM) is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards, and tucks the light underneath either side of the ATPIAL laser\/illuminator series, including the ATPIAL-C, AN\/PEQ15, and LA-5\/PEQ. It will also allow the light to clear the QD lever on the Steiner DBAL I2, A3, and D2.\u003c\/p\u003e\n\u003cp\u003eThe SSM is compatible with the Modlite 18350 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, Modlite 18350 and 18650 and Arisaka 300 and 600 Series.\u003c\/p\u003e\n\u003cp\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp\u003eThickness: 0.2\"\u003c\/p\u003e\n\u003cp\u003eWeight: 0.6 oz\u003c\/p\u003e","brand":"WH3","offers":[{"title":"Black","offer_id":48199614202070,"sku":"SSM-M","price":40.0,"currency_code":"USD","in_stock":true},{"title":"FDE","offer_id":48199614234838,"sku":"SSM-M-FDE","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ArisakaSSM.jpg?v=1778084693"},{"product_id":"arisaka-defense-offset-scout-mount-m-lok","title":"Arisaka Defense Offset Scout Mount M-Lok","description":"\u003cp\u003eThe Patent Pending Arisaka Offset Scout Mount is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The \u003cspan\u003eOffset \u003c\/span\u003e\u003cspan\u003eScout\u003c\/span\u003e\u003cspan\u003e Mount is very low profile at less than 0.20\" thick.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen used on the side mounting surfaces of M-Lok handguards, the Offset \u003cspan\u003eScout\u003c\/span\u003e\u003cspan\u003e Mount places the light at a 45 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Offset \u003cspan\u003eScout\u003c\/span\u003e\u003cspan\u003e Mount\u003c\/span\u003e also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\". When used with the Arisaka \u003ca href=\"https:\/\/www.atomicdefense.com\/products\/b-e-meyers-kiji?_pos=2\u0026amp;_sid=7235da287\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003e300 Series Light Body\u003c\/a\u003e or \u003ca href=\"https:\/\/www.atomicdefense.com\/products\/surefire-lm1-b-bk?_pos=1\u0026amp;_sid=c41bc3fe0\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003e600 Series Light Body\u003c\/a\u003e, even more clearance can be gained for larger front sights.\u003c\/p\u003e\n\u003cp\u003eCompatible with Modlite 18350 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eM620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka \u003ca href=\"http:\/\/arisakadefense.com\/products\/offset-m620-adapter\" target=\"_blank\"\u003eOffset M620 Adapter\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp\u003eWeight: 0.4 oz\u003c\/p\u003e\n\u003cp\u003eThe mount is CNC machined from 6061\u003cspan\u003e-T6\u003c\/span\u003e aluminum and \u003cspan\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a 5\/64\" and 1\/8\" Allen wrench for installation (not included). Cerakote provided by \u003ca href=\"https:\/\/weaponworksllc.com\/\" target=\"_blank\"\u003eWeapon Works LLC\u003c\/a\u003e. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0659\/4513\/files\/M-LOK_Tips.pdf?14179560724824557381\" target=\"_blank\"\u003eM-Lok Installation Guide\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"WH3","offers":[{"title":"Black","offer_id":48199614333142,"sku":"OSM-M","price":48.0,"currency_code":"USD","in_stock":true},{"title":"FDE","offer_id":48199614365910,"sku":"OSM-M-FDE","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/Arisaka_Scout_Mount_and_Pic_Mount_7_of_9.jpg?v=1778084695"},{"product_id":"arisaka-defense-offset-scout-mount-keymod","title":"Arisaka Defense Offset Scout Mount KeyMod","description":"\u003cdiv class=\"description user-content lightboximages\"\u003e\n\u003cp\u003eThe Patent Pending Arisaka Offset Scout Mount is designed specifically for lights that utilize the Scout-style mounting platform. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards. The \u003cspan\u003eOffset \u003c\/span\u003e\u003cspan\u003eScout\u003c\/span\u003e\u003cspan\u003e Mount uses BCM's patented inverted KeyMod screws, which allows it to be less than 0.20\" thick.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen used on the side mounting surfaces of a KeyMod handguard, the Offset \u003cspan\u003eScout\u003c\/span\u003e\u003cspan\u003e Mount places the light at a 45 degree angle and tucks it in closer to the handguard. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Offset \u003cspan\u003eScout\u003c\/span\u003e\u003cspan\u003e Mount\u003c\/span\u003e also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\". \u003cspan\u003eWhen used with the Arisaka \u003c\/span\u003e\u003ca href=\"http:\/\/arisakadefense.com\/products\/300-series-light-body\" target=\"_blank\"\u003e300 Series Light Body\u003c\/a\u003e\u003cspan\u003e or \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003ca href=\"http:\/\/arisakadefense.com\/collections\/light-mounts\/products\/600-series-light-body\" target=\"_blank\"\u003e600 Series Light Body\u003c\/a\u003e\u003cspan\u003e, even more clearance can be gained for larger front sights.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAs shown in the pictures, the \u003cspan\u003eOffset \u003c\/span\u003e\u003cspan\u003eScout\u003c\/span\u003e\u003cspan\u003e Mount fits the Noveske NSR perfectly, and is compatible with most KeyMod handguards like the BCM KMR, KAC URX4, Geissele SMR MK4\/5 KeyMod, Mega MKM, Midwest Industries SSK, and Daniel Defense SLiM.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCompatible withModlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eM620 series lights can also be used with the Offset Scout Mount with the addition of the Arisaka \u003ca href=\"http:\/\/arisakadefense.com\/products\/offset-m620-adapter\" target=\"_blank\"\u003eOffset M620 Adapter\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 1.265\"\u003c\/p\u003e\n\u003cp\u003eWeight: 0.4 oz\u003c\/p\u003e\n\u003cp\u003eThe mount is CNC machined from 6061\u003cspan\u003e-T6\u003c\/span\u003e aluminum and \u003cspan\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a T15 Torx and 5\/64\" Allen wrench for installation (not included). BCM KeyMod screws are covered under US Patent 9377274. Cerakote provided by \u003ca href=\"https:\/\/weaponworksllc.com\/\" target=\"_blank\"\u003eWeapon Works LLC\u003c\/a\u003e. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WH3","offers":[{"title":"Default Title","offer_id":48199614431446,"sku":"OSM-K","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/Arisaka_Scout_Mount_and_Pic_Mount_8_of_9.jpg?v=1778084696"},{"product_id":"arisaka-defense-inline-scout-mount-m-lok","title":"Arisaka Defense Inline Scout Mount M-Lok","description":"\u003cdiv class=\"description user-content lightboximages\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Patented Arisaka Inline Scout\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eMount is designed specifically for lights that utilize the Scout-style mounting platform.\u003c\/span\u003e It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The mount is especially useful on handguards that feature 45 degree angle mounting flats, such as the BCM MCMR, Geissele Automatics SMR MK4, MK8 and MK16, Daniel Defense MFR, KAC URX4, \u003cspan\u003eALG Defense EMR, MI Gen 3, \u003c\/span\u003eMega MML and Mega\/Hodge Wedge Lock.\u003c\/p\u003e\n\u003cp\u003eWhen used on a 45 degree angle mounting flat, the Inline Scout\u003cspan\u003e \u003c\/span\u003eMount allows the user to position the light closer or farther away from the top 12 o'clock rail to give clearance for front sights or other accessories. Three positions are provided, allowing an offset of 0.12\" to either side of center. \u003cspan\u003eThe base of the Surefire Scout Light sits only 0.2\" above the mounting surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation tip: In order to reduce the overall length of the mount as much as possible, it is necessary to unscrew the tail cap of the light to access the front-most mounting screw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis mount is not intended for use in a cantilever fashion where it hangs off the end of the handguard. Doing so may result in mount failure in the event of a heavy impact to the light.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatibility with front sights varies depending on mounting location on handguards with 45 degree flats:\u003c\/p\u003e\n\u003cp\u003e1. Top left 45 degree flat: Most sights work, including MBUS Pro, Knight's Armament Micro, Troy folding, and Diamondhead. MBUS Gen II work if positioned to allow clearance for the release tab.\u003c\/p\u003e\n\u003cp\u003e2. Top right 45 degree flat: Due to the asymmetrical body of the Surefire Scout Light, placement of the front sight and light are more critical in this setup. The smaller sights like MBUS Pro and Knight's Armament Micro work fine, but the Troy, Diamondhead, and MBUS Gen II will not be able to clear the main body where the screw holes reside for the stock picatinny adapter. This means one or the other will have to be moved forward\/back to get appropriate clearance. Another option is to use an Arisaka \u003ca href=\"http:\/\/arisakadefense.com\/collections\/light-mounts\/products\/300-series-light-body\" target=\"_blank\"\u003e300 Series Light Body\u003c\/a\u003e or \u003ca href=\"http:\/\/arisakadefense.com\/products\/600-series-light-body\" target=\"_blank\"\u003e600 Series Light Body\u003c\/a\u003e, which will allow plenty of clearance.\u003c\/p\u003e\n\u003cp\u003eCompatible with the Modlite 183560 and 18650 bodies\/lights, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1, 2 and HL-X, and Arisaka 300 and 600 Series. \u003cstrong\u003eThe Streamlight Protac Rail Mount HL-X requires a shortened 1\/8\" Allen wrench to tighten the front mounting screw. You can modify your own tool or add one to your inline scout mount above\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 3.0\"\u003c\/p\u003e\n\u003cp\u003eHeight: 0.20\" (at Surefire Scout Light mounting point)\u003c\/p\u003e\n\u003cp\u003eWeight: 0.6 oz\u003c\/p\u003e\n\u003cp\u003eThe mount is CNC machined from 7075\u003cspan\u003e-T6\u003c\/span\u003e aluminum and \u003cspan\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a 1\/8\" and 5\/64\" Allen wrench for installation (not included). Cerakote provided by \u003ca href=\"https:\/\/weaponworksllc.com\/\" target=\"_blank\"\u003eWeapon Works LLC\u003c\/a\u003e. Made in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0659\/4513\/files\/M-LOK_Tips.pdf?14179560724824557381\" target=\"_blank\"\u003eM-Lok Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WH3","offers":[{"title":"Black","offer_id":48199614496982,"sku":"ISM-M","price":40.0,"currency_code":"USD","in_stock":true},{"title":"FDE","offer_id":48199614529750,"sku":"ISM-M-FDE","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/Arisaka_New_Inline-Back_6b11992c-53c1-4722-aa93-b717807dfbc4.jpg?v=1778084698"},{"product_id":"arisaka-defense-inline-scout-mount-keymod","title":"Arisaka Defense Inline Scout Mount KeyMod","description":"\u003cdiv class=\"description user-content lightboximages\"\u003e\n\u003cp\u003eThe Patented Arisaka Inline Scout\u003cspan\u003e \u003c\/span\u003eMount is designed specifically for lights that utilize the Scout-style mounting platform. The mount is especially useful on handguards that feature 45 degree angle mounting flats, such as the Bravo Company KMR, Daniel Defense MFR, Knight's Armament URX 4, MI Gen 3 and Mega MKM. This new version is made of 7075 aluminum for superior strength and uses \u003cspan\u003eBCM's patented inverted KeyMod screws with twin recoil lugs for easier installation and a solid connection to your handguard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhen used on a 45 degree angle mounting flat, the Inline Scout\u003cspan\u003e \u003c\/span\u003eMount allows the user to position the light closer or farther away from the top 12 o'clock rail to give clearance for front sights or other accessories. Three positions are provided, allowing an offset of 0.12\" to either side of center. \u003cspan\u003eThe base of the Surefire Scout Light sits only 0.2\" above the mounting surface.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eInstallation tip: In order to reduce the overall length of the mount as much as possible, it is necessary to unscrew the tail cap of the light to access the front-most mounting screw.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis mount is not intended for use in a cantilever fashion where it hangs off the end of the handguard. Doing so may result in mount failure in the event of a heavy impact to the light.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompatibility with front sights varies depending on mounting location on handguards with 45 degree flats:\u003c\/p\u003e\n\u003cp\u003e1. Top left 45 degree flat: Most sights work, including MBUS Pro, Knight's Armament Micro, Troy folding, and Diamondhead. MBUS Gen II work if positioned to allow clearance for the release tab.\u003c\/p\u003e\n\u003cp\u003e2. Top right 45 degree flat: Due to the asymmetrical body of the Surefire Scout Light, placement of the front sight and light are more critical in this setup. The smaller sights like MBUS Pro and Knight's Armament Micro work fine, but the Troy, Diamondhead, and MBUS Gen II will not be able to clear the main body where the screw holes reside for the stock picatinny adapter. This means one or the other will have to be moved forward\/back to get appropriate clearance. Another option is to use an Arisaka \u003ca href=\"http:\/\/arisakadefense.com\/collections\/light-mounts\/products\/300-series-light-body\" target=\"_blank\"\u003e300 Series Light Body\u003c\/a\u003e or \u003ca href=\"http:\/\/arisakadefense.com\/products\/600-series-light-body\" target=\"_blank\"\u003e600 Series Light Body\u003c\/a\u003e, which will allow plenty of clearance.\u003c\/p\u003e\n\u003cp\u003eLength: 3.0\"\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHeight: 0.20\" (at Surefire Scout Light mounting point)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWeight: 0.5 oz\u003c\/p\u003e\n\u003cp\u003eCompatible with Modlite 183560 and 18650 bodies, Surefire M300A, M300B, M300C, M600B, M600C, M600P, M600U, M600V, M600DF, Streamlight Protac Rail Mount 1 and 2, and Arisaka 300 and 600 Series. \u003cstrong\u003eThe Streamlight Protac Rail Mount HL-X is not compatible because the body is longer and covers one mounting screw\u003c\/strong\u003e. \u003c\/p\u003e\n\u003cp\u003eThe mount is CNC machined from 7075\u003cspan\u003e-T6\u003c\/span\u003e aluminum and \u003cspan\u003eMIL-A-8625 Type III\u003c\/span\u003e\u003cspan\u003e hard coat anodized. Includes necessary screws to attach light body to mount. Requires a T15 Torx and 5\/64\" Allen wrench for installation (not included). Made in the USA.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WH3","offers":[{"title":"Default Title","offer_id":48199614595286,"sku":"ISM-K","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/Arisaka_New_Inline-Front-Edit.jpg?v=1778084700"},{"product_id":"arisaka-defense-hand-stop-fits-keymod-anodized-finish-black","title":"Arisaka Defense Hand Stop |  Fits KeyMod |  Anodized Finish |  Black","description":"Unlike a hand stop, which most people position at the rear of their support hand, the Finger Stop has a rounded profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which also means it doesn't get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear. Additionally, the Finger Stop functions well as a forward limit to prevent your fingers from slipping off shorter handguards onto a hot barrel or suppressor, and as a barricade rest.\n\nKEY FEATURES:\nCNC Machined from 6061-T651 Aluminum | Type III Hard Coat Anodized | Hardware: (1) KeyMod Standard Nut and (1) 8-32x1\/2\" Hex Cap Head Screw | Requires a 9\/64\" Allen Wrench for Installation (Not Included)","brand":"WH3","offers":[{"title":"Black \/ KeyMod","offer_id":48206994604246,"sku":"FS-K","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSFS-K_1.jpg?v=1778174151"},{"product_id":"arisaka-defense-finger-stop-anodized-finish-black-fits-m-lok","title":"Arisaka Defense Finger Stop |  Anodized Finish |  Black |  Fits M-LOK","description":"The Patent Pending Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for M-Lok rail systems. Unlike a hand stop, which most people position at the rear of their support hand, the Finger Stop has a rounded profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which also means it doesn't get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear. Additionally, the Finger Stop functions well as a forward limit to prevent your fingers from slipping off shorter handguards onto a hot barrel or suppressor, and as a barricade rest.\n\nKEY FEATURES:\nHeight: 0.85\" | Width: 0.50\" | Weight: 0.4 oz | Hardware: One M-Lok nut and one 10-24x5\/8\" hex cap head screw | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Fits M-LOK \/ Anodized","offer_id":48206994669782,"sku":"FS-M","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Picatinny \/ Anodized","offer_id":48206994702550,"sku":"FS-P","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSFS-M_1.jpg?v=1778174153"},{"product_id":"arisaka-defense-finger-stop-anodized-finish-flat-dark-earth-fits-m-lok","title":"Arisaka Defense Finger Stop |  Anodized Finish |  Flat Dark Earth |  Fits M-LOK","description":"The Patent Pending Arisaka Finger Stop was developed as a low profile, minimal control accessory. This version is for M-Lok rail systems. Unlike a hand stop, which most people position at the rear of their support hand, the Finger Stop has a rounded profile which is ergonomically designed to be located between your index and middle fingers. This typically places it further forward on the handguard, which also means it doesn't get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear. Additionally, the Finger Stop functions well as a forward limit to prevent your fingers from slipping off shorter handguards onto a hot barrel or suppressor, and as a barricade rest.\n\nKEY FEATURES:\nHeight: 0.85\" | Width: 0.50\" | Weight: 0.4 oz | Hardware: One M-Lok nut and one 10-24x5\/8\" hex cap head screw | Made in the USA","brand":"WH3","offers":[{"title":"Flat Dark Earth \/ Fits M-LOK \/ Anodized","offer_id":48206994735318,"sku":"FS-M-FDE","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSFS-M-FDE_1.jpg?v=1778174154"},{"product_id":"arisaka-defense-hand-stop-anodized-finish-black-fits-m-lok","title":"Arisaka Defense Hand Stop |  Anodized Finish |  Black |  Fits M-LOK","description":"The Patent Pending Arisaka Hand Stop is a continuation of our low profile, minimal control accessories. The primary goal of this accessory is to aid the user in pulling their rifle into their shoulder, enhancing control and recoil mitigation. The Hand Stop can also be used as a barricade stop, or reversed and placed at the front of the handguard to prevent the support hand from slipping off the end. The size and profile were designed to fit a wide variety of hands without being too large to get in the way.\n\nKEY FEATURES:\nHeight: 1.3\" | Width: 0.625\" at widest point | Length: 1.4\" | Weight: 0.8 oz | Hardware: Two M-Lok nuts and two 10-24x5\/16\" Torx button head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Fits M-LOK \/ Anodized","offer_id":48206994768086,"sku":"HS-M","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Picatinny \/ Anodized","offer_id":48206994800854,"sku":"IDX-M","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSHS-M_1.jpg?v=1778174156"},{"product_id":"arisaka-defense-vertical-foregrip-anodized-finish-black-fits-m-lok","title":"Arisaka Defense Vertical Foregrip |  Anodized Finish |  Black |  Fits M-LOK","description":"The Arisaka Vertical Grip is a robust, minimal grip for M-Lok handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. Twin mounting screws ensure secure attachment. The grip is hollow, with no end-cap.\n\nKEY FEATURES:\nHeight: 2.50\" | Width: 1.30\" | Weight: 1.8 oz | Hardware: Two M-Lok nuts and two 10-24x3\/4\" hex cap head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Fits M-LOK \/ Anodized","offer_id":48206994997462,"sku":"VFG-M","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSVFG-M_1.jpg?v=1778174158"},{"product_id":"arisaka-defense-hand-stop-anodized-finish-flat-dark-earth-fits-m-lok","title":"Arisaka Defense Hand Stop |  Anodized Finish |  Flat Dark Earth |  Fits M-LOK","description":"The Patent Pending Arisaka Hand Stop is a continuation of our low profile, minimal control accessories. The primary goal of this accessory is to aid the user in pulling their rifle into their shoulder, enhancing control and recoil mitigation. The Hand Stop can also be used as a barricade stop, or reversed and placed at the front of the handguard to prevent the support hand from slipping off the end. The size and profile were designed to fit a wide variety of hands without being too large to get in the way.\n\nKEY FEATURES:\nHeight: 1.3\" | Width: 0.625\" at widest point | Length: 1.4\" | Weight: 0.8 oz | Hardware: Two M-Lok nuts and two 10-24x5\/16\" Torx button head screws | Made in the USA","brand":"WH3","offers":[{"title":"Flat Dark Earth \/ Fits M-LOK \/ Anodized","offer_id":48206995030230,"sku":"HS-M-FDE","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Flat Dark Earth \/ Picatinny \/ Anodized","offer_id":48206995062998,"sku":"IDX-M-FDE","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSHS-M-FDE_1.jpg?v=1778174159"},{"product_id":"arisaka-defense-hand-stop-anodized-finish-black-fits-picatinny","title":"Arisaka Defense Hand Stop |  Anodized Finish |  Black |  Fits Picatinny","description":"The Patent Pending Arisaka Hand Stop is a continuation of our low profile, minimal control accessories. The primary goal of this accessory is to aid the user in pulling their rifle into their shoulder, enhancing control and recoil mitigation. The Hand Stop can also be used as a barricade stop, or reversed and placed at the front of the handguard to prevent the support hand from slipping off the end. The size and profile were designed to fit a wide variety of hands without being too large to get in the way. The Arisaka Hand Stop Picatinny uses a unique recoil lug that extends from inside the part, providing a secure, rattle free lockup. The recoil lug and patched mating screw are captured and cannot fall out when the Hand Stop is removed from the Picatinny rail. A rotation direction indication is CNC engraved onto the part to aid in tightening or loosening the recoil lug. A 7\/64\"\" Allen wrench is required for installation, with a maximum torque specification of 15 inch lbs.\n\nKEY FEATURES:\nHeight: 1.3\" | Width: 1.19\" at Picatinny clamp, 0.625\" at main interface where your hand or fingers contact. | Length: 1.1\" | Weight: 0.84 oz | Hardware: One 6-32x1\/2\" hex cap head screw, one HS-P recoil lug | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Picatinny \/ Anodized","offer_id":48206995095766,"sku":"HS-P","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSHS-P_1.jpg?v=1778174161"},{"product_id":"arisaka-defense-vertical-foregrip-black-picatinny-anodized","title":"Arisaka Defense Vertical Foregrip |  Black |  Picatinny |  Anodized","description":"The Patent Pending Arisaka Vertical Grip is a robust, minimal grip for Picatinny handguards. It features a radiused profile at the top which tapers to meet the mounting surface on the handguard, giving a low-profile feel and ergonomic comfort. The grip is hollow, with no end-cap, and has no externally visible clamp hardware. Instead, it uses a unique recoil lug that extends from inside the part, providing a secure, rattle free lockup. The recoil lug and patched mating screw are captured and cannot fall out when the Vertical Grip is removed from the Picatinny rail.\n\nKEY FEATURES:\nCNC Machined from 6061-T651 Aluminum | Hard Coat Anodized Finish | Includes (1) 6-32x1\/2\" Hex Cap Head Screw and (1) VFG-P Recoil Lug | Requires a 7\/64\" Allen Wrench for Installation (Not Included)","brand":"WH3","offers":[{"title":"Black \/ Picatinny \/ Anodized","offer_id":48206995128534,"sku":"VFG-P","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSVFG-P_1.jpg?v=1778174162"},{"product_id":"arisaka-defense-indexer-fits-geissele-smr-416-anodized-finish-black","title":"Arisaka Defense Indexer |  Fits Geissele SMR 416 |  Anodized Finish |  Black","description":"The Indexer can be used in a variety of ways, but the main intent is to place it between two fingers (usually index and middle). This typically places it further forward on the handguard, which also means it doesn't get in the way when transitioning to kneeling or prone shooting positions, where most people move their support hand towards the rear. Used in this manner, the Indexer makes it much easier to pull the rifle into your shoulder and maintain control while shooting. Additionally, the wider, flatter profile of the Indexer functions very well as a hand stop or barricade stop, and also works as a forward limit to prevent your fingers from slipping off shorter handguards onto a hot barrel or suppressor.\n\nKEY FEATURES:\nCNC Machined from 6061-T651 Aluminum | Type III Hard Coat Anodized | Hardware: (2) 10-32x3\/8\" Torx Flat Head Screws | Requires an IP25 TorxPlus Driver for Installation (Not Included)","brand":"WH3","offers":[{"title":"Black \/ Geissele SMR 416","offer_id":48206995161302,"sku":"IDX-G416","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSIDX-G416_1.jpg?v=1778174163"},{"product_id":"arisaka-defense-light-mount-for-surefire-scout-light-weapon-lights-fits-keymod-anodized-finish-black","title":"Arisaka Defense Light Mount |  For SureFire Scout Light Weapon Lights |  Fits Keymod |  Anodized Finish |  Black","description":"The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300, 600 and 18650 Series, Olight Odin, and the Streamlight Protac Rail Mount 1, 2 and HL-X. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards. The mount is especially useful on handguards that feature 45 degree angle mounting flats, such as the Bravo Company KMR, Daniel Defense MFR, Knight's Armament URX 4, MI Gen 3 and Mega MKM. This version is made of 7075 aluminum for superior strength and uses BCM's patented inverted KeyMod screws with twin recoil lugs for easier installation and a solid connection to your handguard.\n\nKEY FEATURES:\nCNC Machined from 6061-T651 Aluminum | Type III Hard Coat Anodized | Hardware:(2) BCM Inverted KeyMod Screws and (2) 8-32x3\/8\" Torx Flat Head Screws | Requires a T15 Torx and T20 Torx\/IP25 TorxPlus Driver for Installation (Not Included)","brand":"WH3","offers":[{"title":"Black \/ Surefire Scout Light \/ Anodized","offer_id":48206995194070,"sku":"ISM-K","price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSISM-K_1.jpg?v=1778174165"},{"product_id":"arisaka-defense-light-mount-for-surefire-scout-light-weapon-lights-fits-mlok-anodized-finish-black","title":"Arisaka Defense Light Mount |  For SureFire Scout Light Weapon Lights |  Fits MLOK |  Anodized Finish |  Black","description":"The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300, 600 and 18650 Series Lights, Modlite OKW and PLH, Olight Odin, and the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser). It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The mount is especially useful on handguards that feature 45 degree angle mounting flats, such as the BCM MCMR, Geissele Automatics SMR MK4, MK8 and MK16, Daniel Defense MFR, KAC URX4, ALG Defense EMR, MI Gen 3, Mega MML and Mega\/Hodge Wedge Lock. When used on a 45 degree angle mounting flat, the Inline Scout Mount allows the user to position the light closer or farther away from the top 12 o'clock rail to give clearance for front sights or other accessories. Three positions are provided, allowing an offset of 0.12\"\" to either side of center. The base of the Surefire Scout Light sits only 0.2\"\" above the mounting surface. Installation tip: In order to reduce the overall length of the mount as much as possible, it is necessary to unscrew the tail cap of the light to access the front-most mounting screw. This mount is not intended for use in a cantilever fashion where it hangs off the end of the handguard. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600 and 18650 Series.\n\nKEY FEATURES:\nLength: 3.4\" | Height: 0.20\" (at Surefire Scout Light mounting point) | Weight: 0.6 oz | Hardware: Two M-Lok nuts, two 10-24x5\/16\" Torx button head screws, two 8-32x3\/8\" Torx flat head screws | Made in the USA.","brand":"WH3","offers":[{"title":"Black \/ Surefire Scout Light \/ Anodized","offer_id":48206995226838,"sku":"ISM-M","price":37.0,"currency_code":"USD","in_stock":true},{"title":"Tan \/ Surefire Scout Light \/ Anodized","offer_id":48206995259606,"sku":"ISM-M-TN","price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSISM-M_1.jpg?v=1778174167"},{"product_id":"arisaka-defense-light-mount-for-surefire-scout-light-weapon-lights-fits-mlok-anodized-finish-flat-dark-earth","title":"Arisaka Defense Light Mount |  For SureFire Scout Light Weapon Lights |  Fits MLOK |  Anodized Finish |  Flat Dark Earth","description":"The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300, 600 and 18650 Series Lights, Modlite OKW and PLH, Olight Odin, and the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser). It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The mount is especially useful on handguards that feature 45 degree angle mounting flats, such as the BCM MCMR, Geissele Automatics SMR MK4, MK8 and MK16, Daniel Defense MFR, KAC URX4, ALG Defense EMR, MI Gen 3, Mega MML and Mega\/Hodge Wedge Lock. When used on a 45 degree angle mounting flat, the Inline Scout Mount allows the user to position the light closer or farther away from the top 12 o'clock rail to give clearance for front sights or other accessories. Three positions are provided, allowing an offset of 0.12\"\" to either side of center. The base of the Surefire Scout Light sits only 0.2\"\" above the mounting surface. Installation tip: In order to reduce the overall length of the mount as much as possible, it is necessary to unscrew the tail cap of the light to access the front-most mounting screw. This mount is not intended for use in a cantilever fashion where it hangs off the end of the handguard. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600 and 18650 Series.\n\nKEY FEATURES:\nLength: 3.4\" | Height: 0.20\" (at Surefire Scout Light mounting point) | Weight: 0.6 oz | Hardware: Two M-Lok nuts, two 10-24x5\/16\" Torx button head screws, two 8-32x3\/8\" Torx flat head screws | Made in the USA.","brand":"WH3","offers":[{"title":"Flat Dark Earth \/ Surefire Scout Light \/ Anodized","offer_id":48206995292374,"sku":"ISM-M-FDE","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSISM-M-FDE_1.jpg?v=1778174168"},{"product_id":"arisaka-defense-light-mount-for-surefire-scout-light-weapon-lights-fits-picatinny-anodized-finish-black","title":"Arisaka Defense Light Mount |  For SureFire Scout Light Weapon Lights |  Fits Picatinny |  Anodized Finish |  Black","description":"The Patented Arisaka Inline Scout Mount (ISM) is designed for use with Surefire Scout Lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series, and the Streamlight Protac Rail Mount lights. It replaces the stock Picatinny rail adapter with a low profile mount that tucks the light underneath either side of the B.E. Meyers MAWL laser\/illuminator series. Three positions on the mount allow for different diameter light heads to clear the MAWL without interference. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), CD REIN, and Arisaka 300, 600 and 18650 Series.\n\nKEY FEATURES:\nLength: 1.265\" | Thickness: 0.2\" | Weight: 0.6 oz | Hardware: One 10-32x1.25\" Torx cap head screw, two 8-32x3\/8\" Torx flat head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Surefire Scout Light \/ Anodized","offer_id":48206995325142,"sku":"ISM-P","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 1\" \/ Anodized","offer_id":48206995357910,"sku":"RLM-M-1","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSISM-P_1.jpg?v=1778174171"},{"product_id":"arisaka-defense-offset-light-mount-for-surefire-scout-light-weapon-lights-fits-mlok-iwi-galil-sig-sauer-mpx-anodized-finish-black","title":"Arisaka Defense Offset Light Mount |  For SureFire Scout Light Weapon Lights |  Fits MLOK IWI Galil\/Sig Sauer MPX |  Anodized Finish |  Black","description":"This Patented Arisaka Offset Scout Mount is designed specifically for the IWI Galil ACE Gen 2 and SIG MPX M-Lok handguard profiles. Surefire Scout and Scout clones attach directly to the mount, including the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600, and 18650 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. When used on the side mounting surfaces of the Galil ACE Gen 2 and SIG MPX M-Lok handguards, the Offset Scout Mount places the light at a 30 degree angle to properly match the handguard, and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. This mount also works well with the Aero Precision Atlas R-One and S-One handguards. The Offset Scout Mount also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\"\". Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600, and 18650 Series.\n\nKEY FEATURES:\nLength: 1.265\" | Weight: 0.4 oz | Hardware: Two M-Lok nuts, two 10-24x5\/16\" Torx button head screws, two 8-32x3\/8\" Torx flat head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Surefire Scout Light \/ Anodized","offer_id":48206995390678,"sku":"OSM-AM","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOSM-AM_1.jpg?v=1778174173"},{"product_id":"arisaka-defense-offset-light-mount-for-surefire-scout-light-weapon-lights-fits-keymod-anodized-finish-black","title":"Arisaka Defense Offset Light Mount |  For SureFire Scout Light Weapon Lights |  Fits Keymod |  Anodized Finish |  Black","description":"The Patented Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for KeyMod handguards. The Offset Scout Mount uses BCM's patented inverted KeyMod screws, which allows it to be less than 0.20\"\" thick. When used on the side mounting surfaces of a KeyMod handguard, the Offset Scout Mount places the light at a 45 degree angle and tucks it in closer to the handguard. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions. The Offset Scout Mount also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\"\". When used with the Arisaka 300 Series Light Body or 600 Series Light Body, even more clearance can be gained for larger front sights. As shown in the pictures, the Offset Scout Mount is compatible with most KeyMod handguards like the BCM KMR and KAC URX4. It will not fit the handguard profile of the Aero Precision Enhanced Gen 2, SIG MPX, or MCX (unless using the  round suppressor width handguard). Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600 and 18650 Series.\n\nKEY FEATURES:\nLength: 1.265\" | Weight: 0.4 oz | Hardware: Two BCM inverted KeyMod screws, two 8-32x5\/16\" Torx flat head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Anodized","offer_id":48206995423446,"sku":"OSM-K","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOSM-K_1.jpg?v=1778174173"},{"product_id":"arisaka-defense-offset-light-mount-for-surefire-scout-light-weapon-lights-fits-lwrc-handguard-anodized-finish-black","title":"Arisaka Defense Offset Light Mount |  For SureFire Scout Light Weapon Lights |  Fits LWRC Handguard |  Anodized Finish |  Black","description":"The Patented Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for LWRC direct thread handguards. The Offset Scout Mount is very low profile at less than 0.20\"\" thick. When used on the side mounting surfaces, the Offset Scout Mount places the light at a 45 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions. The Offset Scout Mount also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\"\". When used with the Arisaka 300 Series Light Body or 600 Series Light Body, even more clearance can be gained for larger front sights. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600 and 18650 Series.\n\nKEY FEATURES:\nLength: 1.66\" | Weight: 0.4 oz | Hardware: Four 8-32x3\/8\" Torx flat head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Anodized","offer_id":48206995456214,"sku":"OSM-LWRC","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOSM-LWRC_1.jpg?v=1778174175"},{"product_id":"arisaka-defense-offset-light-mount-for-surefire-scout-light-weapon-lights-fits-mlok-anodized-finish-black","title":"Arisaka Defense Offset Light Mount |  For SureFire Scout Light Weapon Lights |  Fits MLOK |  Anodized Finish |  Black","description":"The Patented Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for M-Lok handguards. The Offset Scout Mount is very low profile at less than 0.20\"\" thick. When used on the side mounting surfaces of M-Lok handguards, the Offset Scout Mount places the light at a 45 degree angle and tucks it in closer to the rail system. Oriented upwards, the light is located at approximately the 1:30 or 10:30 clock positions. Oriented downwards, the light is located at approximately the 4:30 or 6:30 clock positions. The Offset Scout Mount also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\"\". When used with the Arisaka 300 Series Light Body or 600 Series Light Body, even more clearance can be gained for larger front sights. The Offset Scout Mount is compatible with most M-Lok handguards like the BCM MCMR, KAC URX4, and Geissele SMR MK8\/14\/16. It will not fit the handguard profile of the Aero Precision Enhanced Gen 2, SIG MPX, or MCX Virtus (unless using the MCX suppressor width handguard). Aero Precision R-One and S-One owners should use the Offset Scout Mount Galil\/MPX. Aero Precision Enhanced Gen 2 owners should use the Offset Scout Mount Spear. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600 and 18650 Series.\n\nKEY FEATURES:\nLength: 1.265\" | Weight: 0.4 oz | Hardware: Two M-Lok nuts, two 10-24x5\/16\" Torx button head screws, two 8-32x3\/8\" Torx flat head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Anodized","offer_id":48206995488982,"sku":"OSM-M","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOSM-M_1.jpg?v=1778174176"},{"product_id":"arisaka-defense-offset-light-mount-for-surefire-scout-light-weapon-lights-fits-mlok-sig-sauer-mcx-anodized-finish-black","title":"Arisaka Defense Offset Light Mount |  For SureFire Scout Light Weapon Lights |  Fits MLOK Sig Sauer MCX |  Anodized Finish |  Black","description":"The Patented Arisaka Offset Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter with a low profile mount for the SIG MCX Virtus M-Lok handguards. Please note: this mount is designed specifically for the standard MCX handguard which has a tall profile with flat sides. If you have the MCX suppressor compliant handguard you should use Arisaka's normal Offset Scout Mount M-Lok. And if you are running a top rail mounted laser like an LA-5, PEQ-15, NGAL, or DBAL, you should use Arisaka's Side Scout Mount MCX. The Offset Scout Mount MCX orients the light at a 45 degree angle and tucks it in closer to the top rail at the 1:30 or 10:30 clock positions. It also provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\"\". When used with the Arisaka 300 Series Light Body or 600 Series Light Body, even more clearance can be gained for larger front sights. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin, CD REIN, and Arisaka 300, 600 and 18650 Series.\n\nKEY FEATURES:\nLength: 1.265\" | Weight: 0.6 oz | Hardware: Two M-Lok nuts, two 10-24x5\/16\" Torx button head screws, two 8-32x3\/8\" Torx flat head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Anodized","offer_id":48206995521750,"sku":"OSM-MCX","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOSM-MCX_1.jpg?v=1778174177"},{"product_id":"arisaka-defense-offset-light-mount-for-surefire-scout-light-weapon-lights-fits-mcx-spear-anodized-finish-black","title":"Arisaka Defense Offset Light Mount |  For SureFire Scout Light Weapon Lights |  Fits MCX Spear |  Anodized Finish |  Black","description":"The Patented Arisaka Offset Scout Mount is designed specifically for the MCX Spear LT handguard, and is intended to be used with the Surefire Scout Light M600 and M300 series weapon lights, the Modlite PLH and OKW weapon lights, the Arisaka 300, 600 and 18650 Series Lights, the Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), and Olight Odin. It replaces the stock Picatinny rail adapter, reducing bulk and bringing the light in closer to the handguard. If mounted at the 3 or 9 o'clock m-lok slots, the mount closely hugs the handguard while also providing enough clearance for top rail mounted lasers like the ATPIAL-C, PEQ-15, DBAL-A2, and NGAL. The mount functions with the MAWL by flipping it over and attaching it to the angled m-lok slots, with the light sitting below. This mount also works well with the Aero Precision Enhanced Gen 2 handguards. The Offset Scout Mount provides three lateral mounting positions for the light body, which allows the user to position the light closer or farther away from the top rail, front sights, or other accessories. Three positions are provided, spanning approximately 0.240\"\". This allows for use next to most laser aiming devices. Compatible with the Modlite PLH, PLHv2 and OKW, Surefire M300A, M300B, M300C, M300V, M312, M322, M312V, M313V, M322V, M600B, M600C, M600P, M600U, M600V, M600DF, M612, M622, M603V, M612V, M622V, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser), Olight Odin and Odin Mini, CD REIN, and Arisaka 300, 600 and 18650 Series.\n\nKEY FEATURES:\nLength: 1.265\" | Weight: 0.4 oz | Hardware: Two M-Lok nuts, two 10-24x5\/16\" Torx button head screws, two 8-32x3\/8\" Torx flat head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Anodized","offer_id":48206995554518,"sku":"OSM-SPEAR","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOSM-SPEAR_1.jpg?v=1778174178"},{"product_id":"arisaka-defense-light-mount-for-surefire-scout-light-weapon-light-fits-troy-alpha-anodized-finish-black","title":"Arisaka Defense Light Mount |  For SureFire Scout Light Weapon Light |  Fits Troy Alpha |  Anodized Finish |  Black","description":"The Patented Arisaka Inline Scout Mount is designed specifically for the Surefire Scout Light M600 and M300 series weapon lights, the Arisaka 300, 600 and 18650 Series, Olight Odin, and the Streamlight Protac Rail Mount 1 and 2. It replaces the stock Picatinny rail adapter with a low profile mount for legacy Troy Alpha handguards.\n\nKEY FEATURES:\nCNC Machined from 6061-T651 Aluminum | Type III Hard Coat Anodized | Hardware: (2) 10-32x7\/16\" Hex Button Head Screws, (2) 8-32x3\/8\" Torx Flat Head Screws and (1) Troy Backer Plate | Requires a 1\/8\" Allen Wrench and a T20 Torx or IP20 TorxPlus Driver for Installation (Not Included)","brand":"WH3","offers":[{"title":"Black \/ Scoutlight \/ Anodized","offer_id":48206995587286,"sku":"ISM-T","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSISM-T_1.jpg?v=1778174180"},{"product_id":"arisaka-defense-light-mount-for-surefire-scout-light-pro-weapon-lights-fits-mlok-anodized-finish-black","title":"Arisaka Defense Light Mount |  For SureFire Scout Light Pro Weapon Lights |  Fits MLOK |  Anodized Finish |  Black","description":"The Patent Pending Arisaka Inline Scout Pro Mount is designed specifically for the Surefire Scout Light Pro swivel bodies. This mount is a drop-in replacement for the OEM M-Lok mount, and allows for optimal positioning with lasers, plus can be used in a cantilever fashion off the end of the handguard for less barrel or suppressor shadow. The Patent Pending design features a triangular shape that resists twisting or bending. Compatible with the following Surefire Scout Light Pro models: M140A, M340C, M340V, M640DF, M640U, and M640V.\n\nKEY FEATURES:\nLength: 3.0\" | Weight: 0.8 oz | Hardware: Two M-Lok nuts, two 10-24x3\/8\" hex cap head screws | Made in the USA.","brand":"WH3","offers":[{"title":"Black \/ Surefire Scout Light Pro \/ Anodized","offer_id":48206995620054,"sku":"ISPRO-M","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Surefire Scout Light \/ Anodized","offer_id":48206995652822,"sku":"OSM-P","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSISPRO-M_1.jpg?v=1778174181"},{"product_id":"arisaka-defense-light-mount-for-surefire-scout-light-pro-weapon-lights-fits-picatinny-anodized-finish-black","title":"Arisaka Defense Light Mount |  For SureFire Scout Light Pro Weapon Lights |  Fits Picatinny |  Anodized Finish |  Black","description":"The Patent Pending Arisaka Inline Scout Pro Mount is designed specifically for the Surefire Scout Light Pro swivel bodies. This mount is a drop-in replacement for the OEM Picatinny mount, and allows for optimal positioning with lasers, plus can be used in a cantilever fashion off the end of the handguard for less barrel or suppressor shadow. The Patent Pending design features a triangular shape that resists twisting or bending. Compatible with the following Surefire Scout Light Pro models: M140A, M340C, M340V, M640DF, M640U, and M640V.\n\nKEY FEATURES:\nLength: 3.0\" | Weight: 1.7 oz | Hardware: Two 10-32x1.25\" Torx cap head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Surefire Scout Light Pro \/ Anodized","offer_id":48206995685590,"sku":"ISPRO-P","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSISPRO-P_1.jpg?v=1778174183"},{"product_id":"arisaka-defense-18350-series-weapon-light-body-compatible-with-surefire-m600df-dual-fuel-parts-converts-to-use-18350-batteries-anodized-finish-black","title":"Arisaka Defense 18350 Series |  Weapon Light Body |  Compatible with SureFire M600DF\/Dual Fuel Parts |  Converts to use 18350 Batteries |  Anodized Finish |  Black","description":"The Arisaka 18350 Series Light Body is a shorter, streamlined replacement body for Surefire Scout Light M600DF weapon lights. This light body converts the light to use an 18350 cell instead of an 18650 cell, reducing the length by over an inch. The 18350 Series Light Body is manufactured without the mounting interface for the stock Picatinny clamp. This greatly increases the clearance for front sights when used in combination with the Arisaka Inline Scout Mount on handguards with 45 degree mounting surfaces adjacent to the top Picatinny rail. It will also fit in any aftermarket Scout mount, as it retains the mounting holes and square lug interface on the underside of the light body.\n\nKEY FEATURES:\nWeight: 0.6 oz | Hardware: One #19 o-ring, one #15 o-ring | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Scoutlight \/ Anodized","offer_id":48206995718358,"sku":"LB-18350","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSLB-18350_1.jpg?v=1778174185"},{"product_id":"arisaka-defense-18650-series-weapon-light-body-compatible-with-surefire-m600df-dual-fuel-parts-anodized-finish-black","title":"Arisaka Defense 18650 Series |  Weapon Light Body |  Compatible with SureFire M600DF\/Dual Fuel Parts |  Anodized Finish |  Black","description":"The Arisaka 18650 Series Light Body is designed as a streamlined replacement body for Surefire Scout Light M600DF weapon lights. The 18650 Series Light Body is manufactured without the mounting interface for the stock Picatinny clamp. This greatly increases the clearance for front sights when used in combination with the Arisaka Inline Scout Mount on handguards with 45 degree mounting surfaces adjacent to the top Picatinny rail. It will also fit in any aftermarket Scout mount, as it retains the mounting holes and square lug interface on the underside of the light body.\n\nKEY FEATURES:\nWeight: 0.6 oz | Hardware: One #19 o-ring, one #15 o-ring | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Scoutlight \/ Anodized","offer_id":48206995751126,"sku":"LB-18650","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSLB-18650_1.jpg?v=1778174186"},{"product_id":"arisaka-defense-18650-series-weapon-light-body-compatible-with-surefire-m600df-dual-fuel-parts-anodized-finish-flat-dark-earth","title":"Arisaka Defense 18650 Series |  Weapon Light Body |  Compatible with SureFire M600DF\/Dual Fuel Parts |  Anodized Finish |  Flat Dark Earth","description":"The Arisaka 18650 Series Light Body is designed as a streamlined replacement body for Surefire Scout Light M600DF weapon lights. The 18650 Series Light Body is manufactured without the mounting interface for the stock Picatinny clamp. This greatly increases the clearance for front sights when used in combination with the Arisaka Inline Scout Mount on handguards with 45 degree mounting surfaces adjacent to the top Picatinny rail. It will also fit in any aftermarket Scout mount, as it retains the mounting holes and square lug interface on the underside of the light body.\n\nKEY FEATURES:\nWeight: 0.6 oz | Hardware: One #19 o-ring, one #15 o-ring | Made in the USA","brand":"WH3","offers":[{"title":"Flat Dark Earth \/ Scoutlight \/ Anodized","offer_id":48206995783894,"sku":"LB-18650-FDE","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSLB-18650-FDE_1.jpg?v=1778174187"},{"product_id":"arisaka-defense-300-series-weapon-light-body-compatible-with-surefire-m300-mini-scout-parts-anodized-finish-black","title":"Arisaka Defense 300 Series |  Weapon Light Body |  Compatible with SureFire M300\/Mini Scout Parts |  Anodized Finish |  Black","description":"The Arisaka 300 Series Light Body is designed as a streamlined replacement body for Surefire Scout Light M300 weapon lights. The 300 Series Light Body is manufactured without the mounting interface for the stock Picatinny clamp. This greatly increases the clearance for front sights when used in combination with the Arisaka Inline Scout Mount on handguards with 45 degree mounting surfaces adjacent to the top Picatinny rail. The 300 Series Light Body is compatible with Scout Light M300 series tailcaps and heads like the KM1E, KE1A and KX1A. IR heads are fully supported. It will also fit in any aftermarket Scout mount, as it retains the mounting holes and square lug interface on the underside of the light body. It is also possible to build a complete light from scratch by sourcing additional components. A variety of tailcaps and aftermarket light heads are available from online retailers. Our favorite light head to pair with the 300 Series Light Body is the Malkoff E1T, which offers higher lumen output and greater spill over the stock M300B, a smaller overall size, and is made in the USA.\n\nKEY FEATURES:\nWeight: 0.5 oz | Hardware: One #17 o-ring, one #15 o-ring | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ SureFire M300 Scout Bezels and Tail Caps \/ Anodized","offer_id":48206995816662,"sku":"LB-300","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSLB-300_1.jpg?v=1778174189"},{"product_id":"arisaka-defense-600-series-weapon-light-body-compatible-with-surefire-m600-scout-parts-anodized-finish-black","title":"Arisaka Defense 600 Series |  Weapon Light Body |  Compatible with SureFire M600\/Scout Parts |  Anodized Finish |  Black","description":"The Arisaka 600 Series Light Body is designed as a streamlined replacement body for Surefire Scout Light M600 weapon lights. The 600 Series Light Body is manufactured without the mounting interface for the stock Picatinny clamp. This greatly increases the clearance for front sights when used in combination with the Arisaka Inline Scout Mount on handguards with 45 degree mounting surfaces adjacent to the top Picatinny rail. The 600 Series Light Body is compatible with Scout Light M600 series tailcaps and heads like the KM2C, KE2A and KX2C. IR heads are fully supported. It will also fit in any aftermarket Scout mount, as it retains the mounting holes and square lug interface on the underside of the light body. It is also possible to build a complete light from scratch by sourcing additional components. A variety of tailcaps and aftermarket light heads are available from online retailers. Our favorite light heads to pair with the 600 Series Light Body are the Malkoff E2HT and E2XT, which have much better beam profiles and higher candela than the Surefire offerings, and are made in the USA. The 600 Series Light Body is NOT compatible with the Surefire M600DF head or 18650 cells. 16650 cells are compatible.\n\nKEY FEATURES:\nWeight: 0.6 oz | Hardware: One #17 o-ring, one #15 o-ring | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ SureFire M600 Scout Bezels and Tail Caps \/ Anodized","offer_id":48206995849430,"sku":"LB-600","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSLB-600_1.jpg?v=1778174190"},{"product_id":"arisaka-defense-600-series-weapon-light-body-compatible-with-surefire-m600-scout-parts-anodized-finish-flat-dark-earth","title":"Arisaka Defense 600 Series |  Weapon Light Body |  Compatible with SureFire M600\/Scout Parts |  Anodized Finish |  Flat Dark Earth","description":"The Arisaka 600 Series Light Body is designed as a streamlined replacement body for Surefire Scout Light M600 weapon lights. The 600 Series Light Body is manufactured without the mounting interface for the stock Picatinny clamp. This greatly increases the clearance for front sights when used in combination with the Arisaka Inline Scout Mount on handguards with 45 degree mounting surfaces adjacent to the top Picatinny rail. The 600 Series Light Body is compatible with Scout Light M600 series tailcaps and heads like the KM2C, KE2A and KX2C. IR heads are fully supported. It will also fit in any aftermarket Scout mount, as it retains the mounting holes and square lug interface on the underside of the light body. It is also possible to build a complete light from scratch by sourcing additional components. A variety of tailcaps and aftermarket light heads are available from online retailers. Our favorite light heads to pair with the 600 Series Light Body are the Malkoff E2HT and E2XT, which have much better beam profiles and higher candela than the Surefire offerings, and are made in the USA. The 600 Series Light Body is NOT compatible with the Surefire M600DF head or 18650 cells. 16650 cells are compatible.\n\nKEY FEATURES:\nWeight: 0.6 oz | Hardware: One #17 o-ring, one #15 o-ring | Made in the USA","brand":"WH3","offers":[{"title":"Flat Dark Earth \/ SureFire M600 Scout Bezels and Tail Caps \/ Anodized","offer_id":48206995882198,"sku":"LB-600-FDE","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSLB-600-FDE_1.jpg?v=1778174191"},{"product_id":"arisaka-defense-low-profile-rail-fits-picatinny-m-lok-5-slot-anodized-finish-black","title":"Arisaka Defense Low Profile Rail |  Fits Picatinny M-LOK |  5 Slot |  Anodized Finish |  Black","description":"The Arisaka Low Profile Picatinny Rail is a 5 or 3 slot Picatinny rail for M-Lok handguard systems. It offers a reduced height to pull any Picatinny accessories closer to the handguard. The 5 slot model connects with three M-Lok nuts which will spread the increased stress of large Picatinny accessories like bipods or vertical grips over more M-Lok slots. The 3 slot version is useful when less rail space is required.\n\nKEY FEATURES:\nCNC Machined from 6061-T651 Aluminum | Type III Hard Coat Anodized | Hardware: (3) M-LOK Nuts and (3) 10-24x5\/16\" Torx Button Head Screws | Requires IP25 or T25 Torx Driver for Installation (Not Included)","brand":"WH3","offers":[{"title":"Black \/ Fits M-LOK \/ Anodized","offer_id":48206995914966,"sku":"LPR-M","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSLPR-M_1.jpg?v=1778174192"},{"product_id":"arisaka-defense-low-profile-rail-fits-picatinny-m-lok-3-slot-anodized-finish-black","title":"Arisaka Defense Low Profile Rail |  Fits Picatinny M-LOK |  3 Slot |  Anodized Finish |  Black","description":"The Arisaka Low Profile Picatinny Rail is a 5 or 3 slot Picatinny rail for M-Lok handguard systems. It offers a reduced height to pull any Picatinny accessories closer to the handguard. The 5 slot model connects with three M-Lok nuts which will spread the increased stress of large Picatinny accessories like bipods or vertical grips over more M-Lok slots. The 3 slot version is useful when less rail space is required.\n\nKEY FEATURES:\nCNC Machined from 6061-T651 Aluminum | Type III Hard Coat Anodized | Hardware: (2) M-LOK Nuts and (2) 10-24x5\/16\" Torx Button Head Screws | Requires IP25 or T25 Torx Driver for Installation (Not Included)","brand":"WH3","offers":[{"title":"Black \/ Fits M-LOK \/ Anodized","offer_id":48206995947734,"sku":"LPR-M-3","price":27.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSLPR-M-3_1.jpg?v=1778174195"},{"product_id":"arisaka-defense-offset-adapter-for-surefire-m620-light-anodized-finish-black","title":"Arisaka Defense Offset Adapter |  For Surefire M620 Light |  Anodized Finish |  Black","description":"The Arisaka Offset M620 Adapter is used to attach Surefire M620, M951\/952\/962 series lights to the Arisaka Offset Scout Mount and Side Scout Mount. The recessed design maintains a low profile. Lateral positions are still available while using the M620 Adapter, which allows you to shift the light closer or further away from the top Picatinny rail for clearance around front sights or other top rail mounted accessories when used with the Offset Scout Mount.\n\nKEY FEATURES:\nCNC Machined from 6061-T651 Aluminum | Type III Hard Coat Anodized | Hardware: (2) 10-32x1\/4\" Hex Button Head Screws, (2) 8-32x3\/8\" Torx Flat Head Screws | Requires a 1\/8\" Allen Wrench and an IP20 TorxPlus Driver for Installation (Not Included)","brand":"WH3","offers":[{"title":"Black \/ Surefire M620 Light \/ Anodized","offer_id":48206996078806,"sku":"M620A","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSM620A_1.jpg?v=1778174196"},{"product_id":"arisaka-defense-40-degree-offset-mount-fits-mlok-to-mlok-anodized-finish-black","title":"Arisaka Defense 40 Degree Offset Mount |  Fits MLOK to MLOK |  Anodized Finish |  Black","description":"The Arisaka M-Lok to M-Lok Adapter (MMA) provides the user with a set of three half M-Lok slots at 40 degrees offset. This is especially useful for handguards that lack M-Lok slots at the 1:30 and 10:30 clock positions. The MMA is perfect for mounting a Unity Hot Button to one side of the top rail, allowing easy activation with your thumb. The MMA can also be used on the 6 o'clock M-Lok slots in combination with a vertical grip like Arisaka's VFG-M to create a grip that angles out to one side, providing more clearance around drum magazines or for use on a light machine gun.\n\nKEY FEATURES:\nLength: 2.2\" | Weight: 0.6 oz | Hardware: Two M-Lok nuts, two 10-24x5\/16\" Torx button head screws | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Fits M-LOK \/ Anodized","offer_id":48206996111574,"sku":"MMA40","price":45.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSMMA40_1.jpg?v=1778174197"},{"product_id":"arisaka-defense-optic-leveler-combo-three-piece-optic-leveling-tool-clear-anodized-aluminum-finish","title":"Arisaka Defense Optic Leveler Combo |  Three Piece Optic Leveling Tool |  Clear Anodized Aluminum Finish","description":"The Arisaka Optic Leveler is an inexpensive, easy-to-use tool for leveling scopes mounted in rings or one-piece mounts. The base plate sits on the Picatinny rail or one-piece mount just below the turret cluster of the scope, and then the matching wedge is inserted from the side. As the 11 degree ramped surfaces of the wedge and base engage, the top of the wedge rises upwards and contacts the turret cluster, automatically leveling it. This product includes the leveler base and both small and large wedges. The small wedge requires a space between the rail\/mount and turret cluster from 0.190\"\" to 0.730\"\". The large wedge requires a space between the rail\/mount and turret cluster from 0.680\"\" to 1.200\"\".\n\nKEY FEATURES:\n(3) Piece Set | 11 Degree Ramped Surface | Material: 6061-T651 Black Anodized Aluminum | Made In The USA","brand":"WH3","offers":[{"title":"Aluminum \/ Anodized","offer_id":48206996177110,"sku":"OL-Combo","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOL-COMBO_1.jpg?v=1778174199"},{"product_id":"arisaka-defense-mount-black-picatinny-anodized","title":"Arisaka Defense Mount |  Black |  Picatinny |  Anodized","description":"The Patented Arisaka Aimpoint Acro Mount Mk2 is designed for the Aimpoint Acro P1 and P2 optics, and will also function with other red dots using the same footprint like the Steiner MPS. The Arisaka Aimpoint Acro Mount Mk2 is available in 1.54\"\", 1.93\"\", and 2.26\"\" heights. 1.54\"\" is considered lower 1\/3 co-witness, meaning standard AR height iron sights are visible in the lower 1\/3 of the red dot optic lens. 2.26\"\" matches up with the Unity FAST FTC Magnifier Mount. AR height irons sights are visible through the window underneath the optic only with the 2.26\"\" Aimpoint Acro Mount Mk2.\n\nKEY FEATURES:\n1.54\" - 3.0 oz | CNC machined from 7075-T651 aluminum and MIL-A-8625 Type III hard coat anodized | Includes one 10-32x1.25\" torx socket cap screw | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Picatinny \/ Anodized","offer_id":48206996209878,"sku":"OM2-ACRO-154","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOM2-ACRO-154_1.jpg?v=1778174200"},{"product_id":"arisaka-defense-mount-black-picatinny-anodized-1","title":"Arisaka Defense Mount |  Black |  Picatinny |  Anodized","description":"The Patented Arisaka Aimpoint Acro Mount Mk2 is designed for the Aimpoint Acro P1 and P2 optics, and will also function with other red dots using the same footprint like the Steiner MPS. The Arisaka Aimpoint Acro Mount Mk2 is available in 1.54\"\", 1.93\"\", and 2.26\"\" heights. 1.54\"\" is considered lower 1\/3 co-witness, meaning standard AR height iron sights are visible in the lower 1\/3 of the red dot optic lens. 2.26\"\" matches up with the Unity FAST FTC Magnifier Mount. AR height irons sights are visible through the window underneath the optic only with the 2.26\"\" Aimpoint Acro Mount Mk2.\n\nKEY FEATURES:\n1.93\" - 3.1 oz | CNC machined from 7075-T651 aluminum and MIL-A-8625 Type III hard coat anodized | Includes one 10-32x1.25\" torx socket cap screw | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Picatinny \/ Anodized","offer_id":48206996242646,"sku":"OM2-ACRO-193","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOM2-ACRO-193_1.jpg?v=1778174201"},{"product_id":"arisaka-defense-mount-black-picatinny-anodized-2","title":"Arisaka Defense Mount |  Black |  Picatinny |  Anodized","description":"The Patented Arisaka Aimpoint Acro Mount Mk2 is designed for the Aimpoint Acro P1 and P2 optics, and will also function with other red dots using the same footprint like the Steiner MPS. The Arisaka Aimpoint Acro Mount Mk2 is available in 1.54\"\", 1.93\"\", and 2.26\"\" heights. 1.54\"\" is considered lower 1\/3 co-witness, meaning standard AR height iron sights are visible in the lower 1\/3 of the red dot optic lens. 2.26\"\" matches up with the Unity FAST FTC Magnifier Mount. AR height irons sights are visible through the window underneath the optic only with the 2.26\"\" Aimpoint Acro Mount Mk2.\n\nKEY FEATURES:\n2.26\" - 3.2 oz | CNC machined from 7075-T651 aluminum and MIL-A-8625 Type III hard coat anodized | Includes one 10-32x1.25\" torx socket cap screw | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Anodized","offer_id":48206996275414,"sku":"OM2-ACRO-226","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOM2-ACRO-226_1.jpg?v=1778174202"},{"product_id":"arisaka-defense-mount-black-picatinny-anodized-3","title":"Arisaka Defense Mount |  Black |  Picatinny |  Anodized","description":"The Patented Arisaka Aimpoint Micro Mount Mk2 is designed for the Aimpoint Micro T1 and T2 optics, and will also function with other red dots using the same footprint, including the Aimpoint H1\/H2, Aimpoint Comp M5\/M5S, Sig Romeo 4 and 5, Vortex Crossfire, and Holosun HS503\/515\/530. The Arisaka Aimpoint Micro Mount Mk2 is available in 1.54\"\", 1.93\"\", and 2.26\"\" heights. 1.54\"\" is considered lower 1\/3 co-witness, meaning standard AR height iron sights are visible in the lower 1\/3 of the red dot optic lens. 2.26\"\" matches up with the Unity FAST FTC Magnifier Mount. AR height irons sights are visible through the window underneath the optic only with the 2.26\"\" Aimpoint Micro Mount Mk2\n\nKEY FEATURES:\n2.26\" - 3.2 oz | CNC machined from 7075-T651 aluminum and MIL-A-8625 Type III hard coat anodized | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Anodized","offer_id":48206996308182,"sku":"OM2-MICRO-226","price":119.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOM2-MICRO-226_1.jpg?v=1778174204"},{"product_id":"arisaka-defense-mount-black-picatinny-anodized-4","title":"Arisaka Defense Mount |  Black |  Picatinny |  Anodized","description":"The Patented Arisaka Aimpoint Micro Mount Mk2 is designed for the Aimpoint Micro T1 and T2 optics, and will also function with other red dots using the same footprint, including the Aimpoint H1\/H2, Aimpoint Comp M5\/M5S, Sig Romeo 4 and 5, Vortex Crossfire, and Holosun HS503\/515\/530. The Arisaka Aimpoint Micro Mount Mk2 is available in 1.54\"\", 1.93\"\", and 2.26\"\" heights. 1.54\"\" is considered lower 1\/3 co-witness, meaning standard AR height iron sights are visible in the lower 1\/3 of the red dot optic lens. 2.26\"\" matches up with the Unity FAST FTC Magnifier Mount. AR height irons sights are visible through the window underneath the optic only with the 2.26\"\" Aimpoint Micro Mount Mk2\n\nKEY FEATURES:\n1.54\" - 3.0 oz | CNC machined from 7075-T651 aluminum and MIL-A-8625 Type III hard coat anodized | Made in the USA","brand":"WH3","offers":[{"title":"Black \/ Anodized","offer_id":48206996340950,"sku":"OM2-MICRO-154","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/files\/ARSOM2-MICRO-154_1.jpg?v=1778174205"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0004\/0635\/5980\/collections\/images_7a8279b5-9a00-4de7-8b12-ed13b5c02236.png?v=1779990907","url":"https:\/\/www.atomicdefense.com\/collections\/arisaka.oembed","provider":"Atomic Defense","version":"1.0","type":"link"}