X4 Rail-Mounted Remote | Tactical Control for LRF & FCS

• The Maztech X4 Rail-Mounted Remote puts control of your gear right at your fingertips. This remote easily attaches to your weapon's rail, letting you use your X4-FCS or X4-LRF without moving your hands. You can stay focused on your target and ready for action while having full control of your system.
• Instant Control from Any Position: Use all the functions of your X4 device without changing your grip or taking your eyes off the target. The three-button keypad gives you full control from any tactical position you choose.
• Works With Your Entire X4 System: This remote is built to work with both the X4-FCS and the X4-LRF. When you connect the FCS and LRF together, the remote plugs into the FCS to control the LRF’s most important functions.
• Works in Extreme -40°F to 140°F Weather: Made in the USA, this remote is designed to meet MIL-STD-810 environmental specs. It is rated to work in freezing cold and intense heat and can even be submerged in water for 30 minutes.
• Ready in Seconds with No Batteries Needed: It mounts easily to standard Picatinny rails with a T15 tool (included) or a flathead screwdriver. The remote gets power from your main X4 device, so you never need to worry about batteries.

What are some common accessories to add to the Rail-Mounted Remote for Maztech X4?

Core X4 Systems for Remote Operation

• X4-FCS (Fire Control System): The X4 Rail-Mounted Remote plugs directly into the I/O Accessory Port on the X4-FCS. When connected, the remote's three-button keypad is used to perform the same functions as the control knob and push-button on the FCS unit. This integration allows the operator to control the fire control system's functions from any tactical position on the rail.
• X4-LRF (Laser Rangefinder): The X4 Rail-Mounted Remote connects to the I/O Accessory Port on the X4-LRF to provide full control of the unit. The remote's keypad maps to the primary functions of the LRF, including the (L)ase, (M)enu, and (R)ange buttons. This allows the operator to use the laser rangefinder's features without moving their hands from a ready position.

System Linking Accessories

• X4 FCS-to-LRF Cable: This cable connects the X4-FCS and X4-LRF into an integrated system. When these two devices are linked, the X4 Rail-Mounted Remote plugs into the I/O port on the X4-FCS. The remote then controls the connected X4-LRF, giving the operator command of the Lase and Range functions through the FCS.

X4 System Rail Mounted Remote Features & Specifications

The Maztech X4 Rail-Mounted Remote is essential for any operator because it allows you to control your advanced X4 system without ever moving your hands from a ready position. This remote keeps you faster, safer, and more focused on the mission by putting full control of your fire control system or laser rangefinder right at your fingertips. Built in the USA to military standards, it works in extreme weather and connects with a rugged, reliable plug that won't fail under fire, so your gear is always ready when you are.

Key Features

• Total X4 System Control: This single remote works with the X4-FCS, the X4-LRF, or both systems when they are linked together.
• Simple 3-Button Operation: The keypad gives you full control with tactile feedback on every click. The buttons simulate the knob-turns and presses for the X4-FCS , and map directly to the Lase, Menu, and Range functions on the X4-LRF.
• Built for Tough Conditions: Designed to meet MIL-STD-810 environmental specifications for reliable performance in any situation. It can be submerged in up to three feet of water for 30 minutes.
• Secure Breakaway Connector: Uses a rugged ODU® I/O connector that ensures a solid connection during weapon fire but can break away if snagged.
• No Batteries Needed: The remote gets its power from the X4 device it is plugged into, so you never have to worry about it dying.
• Optimized 8" Cable: The cable is long enough to place the remote where you need it, but short enough to minimize snag hazards.

Specifications

• Weight: 1.5 oz (41 g)
• Dimensions (L,W,H): 13.9 x 1.3 x 0.8 in (352 x 33 x 10 mm)
• Platform Compatibility: Mounts to STANAG 4694, STANAG 2324, and Picatinny MIL-STD-1913 rails.
• Device Compatibility: X4-FCS (Fire Control System) and X4-LRF (Laser Rangefinder).
• Temperature Rating: -40°F to 140°F (-40°C to 60°C)
• Rail Bolt Interface: T15 Torx (wrench included) or a flathead screwdriver.
• Country of Origin: Made in the USA.

What's in the box of the Maztech MZT004?

• (1) X4 Rail-Mounted Remote
• (1) T15 Torx Wrench 

Rail Mounted Remote for the X4 System FAQs

Will this remote work with my X4-FCS and my X4-LRF? 

Yes, it is made to work perfectly with either the X4-FCS or the X4-LRF. You can plug it directly into either device. If you link your FCS and LRF together, the remote plugs into the FCS and controls the key functions of your LRF.

What kind of batteries does this remote use? 

None at all. The remote gets all its power from the X4 device it is plugged into. You never have to worry about the batteries dying.

What do the three buttons on the remote do?

 The buttons control the main features of the X4 device you are connected to. For the X4-FCS, the buttons let you do the same things as turning the knob and pressing the button on the unit itself. For the X4-LRF, the buttons control the Lase, Menu, and Range functions. You will feel a "click" each time you press a button.

Where is the X4 Rail-Mounted Remote made?

 It is designed and manufactured in the USA.

Where can I find the X4 Rail-Mounted Remote for sale?

You can purchase the Maztech X4 Rail-Mounted Remote directly from Atomic Defense. Atomic Defense is an authorized and trusted dealer of Maztech products. When you buy from Atomic Defense, you are guaranteed to receive genuine equipment backed by reliable and comprehensive customer support from knowledgeable staff.